Static vs Dynamic QR Codes
A static QR code stores your content directly in the pattern of dots. A dynamic QR code stores a short redirect link that points to a server, and that server forwards the visitor to your real destination. Dynamic codes let a company change the destination later and count scans, but they depend on the service staying active. Some providers switch a dynamic code off after a trial or when a subscription ends, and the printed code stops working.
The codes made on this page are static. There is no redirect and no account, so the code itself never expires and has no scan limit. One honest limit applies: a link QR code is only as long-lived as the page it points to, so if your website goes offline, the QR code will open an error page. The trade-off of static codes is that you cannot change the destination after printing, and you cannot see scan counts.
What Each QR Type Does
| Type | What is stored | What happens on scan |
|---|---|---|
| URL / Link | https://example.com/page | The phone offers to open the web page, video or menu. |
| Wi-Fi Card | WIFI:T:WPA;S:Name;P:Pass;; | The phone offers to join the network without typing the password. |
| UPI / Pay | upi://pay?pa=id@bank&pn=Name&cu=INR | A UPI app that supports payment links opens with the payee filled in. |
| Plain Text | Any text you type | The phone shows the text, for example a coupon code or a serial number. |
How a Wi-Fi QR Code Works
A Wi-Fi QR code holds a short line of text with your network name (SSID), password and security type. Recent iPhones and Android phones recognise this format in the camera app and offer to join the network. This is useful for guests, rental properties, cafes and offices, because nobody has to read out or type a long password.
A few practical points: choose the same security type that your router uses, which is almost always WPA/WPA2/WPA3 today. Names and passwords are case-sensitive. If your password contains characters such as a semicolon, comma, colon, quotation mark or backslash, this tool adds the required escape character for you, so the code still works. Remember that anyone who can scan the printed code can join the network, so do not put a Wi-Fi QR code in a public place if the network is private. A guest network is a safer choice.
UPI Payment QR Codes
The UPI mode builds a standard payment link that contains your UPI ID and a payee name. When a customer scans it with a UPI app, the app opens with your details filled in, and the customer enters the amount. Always make a small test payment from a different account before you print signs or bills, and check that the name shown matches your business. If you run a shop, the merchant QR code issued by your bank or UPI app may offer extra features such as automatic payment notifications. This tool only creates a simple payment link, so treat it as a convenient option for personal or small use.
Design Rules for Reliable Scanning
- Keep strong contrast. Use dark dots on a light background. Light dots on a dark background (an inverted code) are not read by every scanner. This tool warns you if your colors have low contrast or are inverted. You can check any color pair with the Image Color Palette & Contrast Extractor.
- Leave a quiet zone. The standard asks for a blank margin of four modules (dot widths) around the code. The exports from this tool keep that margin, so do not crop it away or place text and borders closer to the dots.
- Prefer square modules for printing. Rounded and circular styles look good, and the tool keeps the three corner squares solid in dot mode to help scanners, but classic squares are the safest choice for small or low-quality prints.
- Do not add a logo over the dots. This tool uses the lowest error correction level, which can only recover a small damaged area, so a logo on top of the code can make it unreadable.
- Keep the content short. Fewer characters mean fewer, bigger dots, which scan faster from further away.
How Much Data Fits
This generator encodes text in byte mode at error correction level L, up to QR version 10 (57 x 57 modules). That allows up to 271 bytes, about 271 English characters. Letters from other scripts and symbols such as the rupee sign use more than one byte each, so the limit is lower for them. The status label under the preview shows the QR version and the number of bytes used. If your content is too long, the tool tells you instead of silently cutting it, because a cut link would lead to the wrong place.
Printing Sizes and Tips
- Minimum size: about 2 x 2 cm for something held in the hand, such as a business card or a product label.
- Distance rule: as a rule of thumb, the code should be about one tenth of the scanning distance, so a poster scanned from 2 metres should have a code of roughly 20 cm.
- Export size: the PNG is 1000 pixels wide, which is sharp enough for a sticker or a table card up to about 8 to 10 cm at 300 dpi. For very large prints, check the result carefully before printing in bulk.
- Always test the real print. Scan the printed sample with at least two different phones, in the same light where it will be used.
- Choose matte paper. Glossy surfaces reflect light and can make scanning harder.
How to Use This Tool
- Select the QR type: link, Wi-Fi, UPI or text.
- Type your details. The preview updates as you type.
- Choose colors, module shape and the bottom label.
- Check the status label under the preview for warnings about length or contrast.
- Download the framed sticker or the square code, then scan it with your phone before sharing or printing.
How We Verify This Tool
The QR encoder in this page is written from the ISO/IEC 18004 specification and runs entirely in your browser, with no outside library or server. We test its output against independent QR decoders, including several hundred random links and texts across all supported sizes, and we choose the mask pattern automatically using the standard penalty rules. No test replaces a real scan, so we still recommend scanning your final design on your own phone before you rely on it.
Frequently Asked Questions
Do these QR codes expire?
No. They are static QR codes: your link, Wi-Fi details or text are written directly into the pattern, with no redirect server in between. The code itself never expires and has no scan limit. A link QR code only works as long as the page it points to stays online.
How do I make a Wi-Fi QR code?
Choose Wi-Fi Card, enter the network name and password, pick the security type (usually WPA/WPA2/WPA3), then download the PNG. Recent iPhone and Android cameras offer to join the network when they scan it.
Are my Wi-Fi password and links sent to a server?
No. The QR code is built in your browser with JavaScript and HTML5 Canvas. Your password, links and UPI ID are not uploaded.
How much data fits in the QR code?
Up to 271 bytes of text (about 271 English characters) at error correction level L. Shorter content makes bigger, easier-to-scan modules, so keep links as short as you can.
Can I use the QR codes for commercial printing?
Yes. The codes are free for personal and commercial use, with no watermark. Always scan a printed test on a real phone before printing in bulk.
What size should I print a QR code?
As a rule of thumb, at least 2 x 2 cm for close scanning, and about one tenth of the scanning distance for signs (a 1 metre distance needs roughly 10 cm). Keep a clear blank margin around the code.
More free tools: see all utilities on the Decoded Buyer hub. This tool is free and does not collect your data. QR Code is a registered trademark of Denso Wave Incorporated. UPI is a product of NPCI, and Decoded Buyer is not affiliated with either.